|
|
155274 PCF1-20MB | |
| |
| USD $56.90
|
| |
| PCF Series cartridges have been developed in response to the requirements for deionized water in many industries.
They are manufactured using an FDA-compliant resin that has been subjected to additional postproduction steps to minimize the total organic carbon (TOC) level.
These high-capacity, semi-conductorgrade resin cartridges are ideal for use in pharmaceutical and medical laboratories, cosmetics, and circuit board printing applications.
PCF Series cartridges are available in three sizes, flow rates and capacities.
They are convenient and cost effective for many applications where low levels of total organic carbon (TOC) and total dissolved solids (TDS) are required.
|
| Features:
-
Size 2-2/3" x 20" (68 mm x 508 mm)
-
Capacity Grains 600 (38,800) (mg TDS as CaCO3)
-
Initial ÄP (psi) @ Flow Rate 3.4 psi @ 0.50 gpm (0.23 bar @ 1.9 L/min)
-
Suggested Flow Rate 0.50 gpm (1.9 L/min)
-
Specification Sheet
|
| | Applications:
-
Circuit board printing
-
Pharmaceutical use
-
Steam and humidification
-
Cosmetics
-
Steam processors
-
Humidification systems
-
Recirculating/cooling towers
-
Power generating equipment
-
Medical/laboratory use
-
Lasers
-
Jet water sprayers
-
Boiler make-up water
|
|
| Reference: | 155274 |
|
| Manufactured by: | Pentek |
|
| Size: | 2-2/3" x 20" |
|
| Weight: | 4.00 lb |
|
| Additional Information: | 6 per case |
|
| Payment Methods |
| MasterCard, Visa, Discover |
|
